Downloading Windows updates is important for system stability, but another important aspect of any operating system is its drivers.

Start SFC scan

  1. Right-click in the Start menu and open the command line (Admin).
  2. Type the following line and press the Enter key:
    sfc/scannowError
  3. Wait for the process to complete (this may take some time).
  4. When a solution is found, it is automatically applied.
  5. Now close the command line and restart the computer.

The next troubleshooting tool we are going to try here is the SFC scan. This command line program searches your system for possible problems.

If he finds the cause of the “NO PAGES AVAILABLE” error on the blue screen, he will probably fix it.

5. Start the DISM

  1. Right-click on Start and open the command line (Admin).
  2. Enter the following command and press Enter:
    DISM /Online /Cleanup-Image /RestoreHealthError
  3. Wait for the scan to complete.
  4. Restart your computer and try the update again.
  • Using Windows installation media
  1. Insert the Windows installation media.
  2. Right-click in the Start menu and select Command Prompt (Admin).
  3. On the command line, type the following commands and press Enter after each command :
    Remove/delete image/health scan
    Delete/remove image/health analysis
  4. Now type the following command and press the Enter key :
    DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess
  5. Be sure to change the X value for the mounted drive letter when you install Windows 10.
  6. Restart the computer when the process is complete.

Deployment Image Service and Management (DISM) re-installs the system image, which can cause various problems. Hopefully including the “NO PAGES AVAILABLE” error.

6. Check the hard drive.

  1. Go to the advanced boot procedure (restart the computer by holding down the Shift key).
  2. Select Troubleshooting and go to Advanced Settings.
  3. Select the command line from the list of options.
  4. When the command line appears, type the following lines and press Enter after each line to run it:
    bootrec.exe /rebuildbcdErrorbootrec.exe
    /fixmbrbootrec.exe
    /fixboot
  5. Some users also recommend running additional chkdsk commands. To run these commands, you need to know the drive letters of all the partitions on the hard drive. You should type the following on the command line (but be sure to use the letters that correspond to the partitions on your computer’s drive)
    chkdsk /r c:Error! The file name is not specified.chkdsk /r d :
  6. Restart the computer and check if the problem is solved.

Damaged hard drive sectors or other hard drive related issues can easily cause various BSOD problems. Including the blue screen error “NO PAGES AVAILABLE”.

So a hard drive check won’t hurt.

7. check for software problems

Error: The file name is not specified.

As mentioned earlier, BSoD errors can be caused by software. If you have installed new software before this error, make sure you uninstall it.

Note that almost any software can cause a BSoD error, so be sure to uninstall any recently installed software.

One of the most common causes of BSoD errors is your antivirus software.

Using antivirus software is important, but some antivirus software may have problems with Windows 10, which means you should remove it from your PC.

Almost all antivirus software can cause such problems, so you should remove all antivirus software except Windows Defender.

Using uninstall tools to remove antivirus software is a good practice, because many antivirus programs leave some files behind after uninstalling.

Some users reported that uninstalling antivirus software does not fix the “NO PAGES AVAILABLE” error, but using a special tool for removal does.

Many security companies offer these tools for their software, so be sure to download them.

Sometimes you cannot open Windows 10 because of a BSoD error, and if this is the case, you need to uninstall a specific program in Safe Mode.

To switch to secure mode, proceed as follows

  1. Restart the computer at boot time. Repeat this step until the computer enters automatic recovery mode.
  2. Select Troubleshooting and go to Advanced Settings. Select Startup Options and click Restart.
  3. After you restart your computer, you should see a list of options. Select network safe mode by pressing 5 or F5.
  4. If you go to safe mode, try to remove the applications that are causing problems.

In Safe Mode, check that your computer is working properly. If you do not get BSoD errors in Safe Mode, your problem is probably related to a problematic software or driver and you need to find and remove it.

The best way to do this is to use a specialized uninstall software, such as IOBit Uninstaller.

This kind of software removes the application and all its files and registry entries, so you need a tool to uninstall the application.

Get IOBit Uninstaller.

8. Using System Restore / Windows 10 Reset

Error: The file name is not specified.

If the BSoD error is caused by a software problem, you can fix the problem by performing a system restore. To do this, follow these steps:

  1. Perform automatic recovery by rebooting the computer several times during the boot process.
  2. Choose Troubleshooting. Now go to the advanced options and select System Restore.
  3. Enter your username and password and select a restore point.
  4. Wait for the recovery process to complete.

If restoring your system does not work, you may need to restart Windows 10.

Remember that resetting Windows 10 will delete all files and folders from your C drive, so be sure to back them up. Follow these steps to restore Windows 10

  1. Restart the computer several times during the boot process.
  2. Select Troubleshooting and Reset this PC.
  3. Choose Delete All. Now navigate to the Drive Only partition where Windows is installed and select Just delete my files.
  4. Wait for the process to complete.

If the problem persists after resetting, the NO_PAGES_AVAILABLE error is probably due to a hardware failure.

9. Check your equipment.

Error: The file name is not specified.

Newly installed hardware can cause BSoD errors, especially if the new hardware is not fully compatible with the motherboard.

If you installed new hardware before the “NO PAGE AVAILABLE” error occurs, remove or replace the hardware and check if the problem is resolved.

If the problem persists, it may be due to faulty equipment.

The most common cause of BSoD errors is your RAM, and to check your RAM, you should test the RAM modules individually.

Simply remove all but one of the RAM modules and see if the problem persists. Repeat this process for all installed modules.

In addition, you can use tools such as MemTest86+ to check that your RAM is working properly.

If your memory is working properly, it may be due to the motherboard, hard drive, or other hardware component.

The error message “NO PAGES AVAILABLE blue screen” may be a problem. This error is often caused by a faulty RAM module, but before replacing the RAM, try the other solutions presented in this article.

FAQ : More information about the error message “NO PAGES AVAILABLE”.

  • What is the error message “NO PAGES AVAILABLE”?

The error NO PAGES AVAILABLE is a BSoD error and is often caused by a faulty RAM module. Therefore, try removing and reconnecting the RAM modules to find out which module is defective.

  • How do I correct the error message “NO PAGES AVAILABLE”?

The first thing you need to do is make sure Windows 10 and your drivers are up to date and run the BSOD troubleshooter. If the problem persists, follow our full guide to fix the “NO PAGES AVAILABLE” error message.

  • How can I check if my RAM is defective?

You should use Windows memory diagnostics to check your memory. Here are the instructions to use it.

Editor’s note: This article was originally published in June 2016 and revised and updated in February 2021 to ensure timeliness, accuracy and completeness.

Frequently asked questions

How do I fix a page defect in an area that is not a page?

How do I correct the error “Error page in a different area than a page” in …

How do I resolve a Windows 10 error code?

How to find shutdown codes and fix errors in Windows 10 – MakeUseOf

What is the page error in the non-page area?

PAGE FAULT IN NONPAGED AREA (or PAGE_FAULT_IN_NONPAGED_AREA) occurs when the Windows operating system cannot find data to be stored in a non-page area. This error usually occurs due to hardware problems such as bad sectors on the hard drive. Check the hard drive for errors.

windows 10 0x00000050,bsod page_fault_in_nonpaged_area windows 10,the bugcheck was: 0x00000050,bug check string page_fault_in_nonpaged_area,page_fault_in_nonpaged_area 2012 r2,msdn bugcheck page_fault_in_nonpaged_area,blue screen code 50,0×00000050 bsod

You May Also Like

How to Download and Install Facebook Messenger on Windows 10 PC

Until recently, Facebook Messenger on Facebook could only be used with a…

Steps To Start And Join Live Voice Chat On Telegram

To attract more users to its cloud-based instant messaging solution, Telegram announced…

Why Choosing an ITAD Company is Important to your Business

The destruction of hard drives as a means of data protection is…

Download Vivo PC Suite and Vivo Mobile Assistant Latest (2021)

Vivo PC Suite (Vivo Assistance Manager) is a tool for the Windows…