Traditionally, Windows operating systems are installed using CDs and DVDs, but as optical drives have gradually moved away from modern computer systems, USB drives are the best alternative to most data storage and retrieval operations.
Until the last version, however, Windows 7 was mainly designed for installations with optical disks. USB 2.0 allows you to set up USB as a bootable version, copy Windows installation files to it and use it as an alternative to CDs and DVDs.
However, with USB 3.0 it has become more difficult to use this alternative approach because Windows 7 does not have the necessary drivers to efficiently exchange data with a USB stick and a hard drive when Windows is installed.
With this drawback an error message is displayed: The required CD/DVD driver is missing. If you have a floppy disk, CD, DVD or USB memory stick, insert it now. when installing Windows 7.
This error is specific to Windows 7, in Windows 10 a similar error occurs as follows USB Windows 10 Clean Install – A media driver your computer needs is missing. You can find a solution for this error in Windows 10 HERE.
Although this error message indicates that this is due to the lack of a device driver. However, if you refer to a CD or DVD, if you explicitly use a USB stick, ask yourself who misunderstands whom.
Even scarier is the idea that this happens after the installation files have been downloaded, because then you wonder how the installation files were downloaded at all.
Main cause of this error
The main reason for this error is that the USB controller chip of this notebook is not recognized by Windows 7. So, although you can boot and download the installation files via USB, Windows 7 does not have access to your computer’s hard drive because USB does not have the necessary drivers.
If you can install DVDs with Windows 7, you don’t have to worry about that, but if you don’t have an optical disc, one of the solutions suggested in this article may be useful.
Several solutions have been proposed to solve this problem. For example, stop the installation, remove the USB stick, reconnect it to the same port and start the installation from the beginning.
The other is to complete the installation, remove the USB stick, reconnect to another port (probably switching from a USB 3.0 to a USB 2.0 port), and then restart the installation from the beginning.
There are also suggestions for disabling USB 3.0 in the BIOS. Each of these three proposals rarely addresses this problem. The initial offer may work in very rare situations where, for some reason, your USB is not in full contact with the ports, so reconnection will establish a better contact.
The second solution is probably more effective than the first, but it is more effective when the problem arises from a point of disagreement. So, if your USB stick is version 3.0 and your active ports are also version 3.0, changing the port will not solve the problem.
Here I used the word active to refer to the USB ports designed by the manufacturer to work before installing the operating system. Some manufacturers specify only one or two ports for the installation of the operating system, others after the installation of the operating system and updating the USB drivers.
So if only USB 3.0 ports are enabled, you will probably see the same error after switching to other ports. A third alternative solution, disconnecting a USB 3.0 port from the BIOS, may be effective if your USB stick is a 2.0 standard, and if you automatically switch to 2.0 after disconnecting the 3.0 ports, otherwise you will still be stuck.
Buy a genuine Windows 10 Pro OEM license key at a low price
Most effective solution
I finally left them because this solution takes a little longer than the alternative solutions discussed above, but it is certainly the most effective solution to this problem.
The idea is to install the necessary USB drivers so that Windows 7 can access the hard disk of your PC and continue the installation. Here I have simplified the driver installation process in two main steps; they are quite easy to use and require little or no technical knowledge.
Here I assume that you already have a bootable USB stick with the Windows 7 installation files, otherwise this error will not occur. So I won’t go into the details of creating a bootable USB stick or copying the Windows 7 installation files to USB. The first step is to download the Windows 7 gigabyte USB installer from this page.
If you know the type of motherboard, you can download the right driver, but if you are not sure, you can try version :. B17.1023.1 , which supports AMD series motherboards, as shown in the figure below, this version is compatible with most motherboards.
The size of this utility is about 28 MB, so it should load relatively quickly.
Best VPN service | Protect your online activities
The second step is to add USB 3.0 drivers to a bootable USB with the Windows 7 installation files. To do this, first insert a bootable USB stick with Windows 7 installed, then navigate to the folder where you saved the downloaded Windows Installer gigabyte, right-click and select Eject All, then select the location where you want to eject and wait for the ejection to complete.
After extraction, you must create a folder named WindowsImage Tool. Open the folder, you should see this program WindowsImageTool .
Double-click Start. At this point, I must mention that the Windows Gigabyte USB Installer is not a disk application like Rufus or the Windows Media Builder tool, it simply changes your Windows 7 installation files to include the necessary USB drivers so you don’t have to worry about the files stored on your USB device, Windows Image Builder will not overwrite or delete your files.
Recovery of all deleted files, 100% security, millions of confidence (for Windows)
Leave the source path here as None-Add USB Driversand then select USB as the destination path containing the Windows 7 installation files. By default, the option Add USB drivers to Windows 7 Offline image is selected and the option Add packages to Windows 7 Offline image is automatically selected. So you need to look at all three options. Then click on the Start button to start the installation process.
As said, it will still take some time, maybe 15 to 30 minutes or more, with a faster USB there may be a time saving in this process, but not so much.
The advantage is that you only need to install the USB driver once and you can use it for multiple installations on different chipsets, so be patient with it.
Super fast USB Flash Drives
After successful use of this tool, no noticeable changes will be made to the Windows 7 installation files that appear in the USB folder. However, the drivers required for the installation must be installed and must not cause any errors when you try to restart the installation.
And yes, with this USB you can still install Windows 7 via a USB 2.0 port.
- If you have similar problems with Windows 10, take a look at the solution discussed HERE.
- How can you download the latest ISO file for Windows 10 for FREE?
- Here you will find step-by-step instructions for installing Windows 10 from a USB stick.
- Slow start on Windows 10
- To run Windows 10 from a USB stick
- How to clone a free hard drive or SSD under Windows 10
Give your comments, questions and feedback in the comment section below. The following video shows the solutions proposed in this tutorial
Additional resources for window 10:
a required cd/dvd drive device driver is missing dell,a required cd/dvd drive device driver is missing asus motherboard